1981 TO 2011 … THAT’S 30 YEARS IN BUSINESS.

Another magnificent milestone has been passed, 30 years, that’s a long time for a company to survive in these turbulent times .

We are excited to celebrate this anniversary and take a little time to reflect our success as we look forward to the future with great anticipation. 

Times change, downsizing and corporate relocation are old news.  Challenges change as industries shift continents but the rewards of our efforts are just as satisfying.

We look back with pride on our accomplishments and thank our loyal staff and excellent suppliers for their service through the years. Our success is summarized by Multicyl's business axiom which is a simple one.

“Be scrupulously fair and consistent with everybody. And when you promise to do something....do it.”

This axiom has stood the company in good stead for its first 30 years.  We are confident it will take us through the next 30 years with matching success.

Just by coincidence as this article was being written this MC series cyl was returned for repair. Built in 1988 a seal kit was all that was needed to rebuild this cyl back into full production.

Just like a Rolls Royce Multicyls never break down “they may be temporarily out of commission!”

Identifying a Multicyl Cylinder

One of the most common questions we get when we talk to a customer is “How do I know what cylinder I have?” 

There are two sets of numbers stamped on a multicyl's main body.  One set of numbers is the model number, the other is the serial number

First let’s take a look at the model number. 

You can see three sets of numbers stamped into the metal beneath the oil reservoir.  This particulat cylinder is a 20 16 7.

What does this mean?

The first number is tonnage  X2

so 20/2= 10Tons@120 PSI

the second number is the total stroke in 1/8th of an inch

16/8 = 2" Total stroke

the third numer is power stroke in 1/32nds of an inch

7/32" total power stroke.

The serial number to the cylinder can be found stamped in the same area on the back of the cylinder

Multicyl Trademarks - Helping the User

The implementation of recently trade marked Press-In-A-Box™ Multicyl packages and our Systematic™ Multicyl selection tool has implications for promotional and practical use both for our new customers and existing users of Multicyl products.

Press-In-A-Box™ offers the user a complete work station which converts

“From Box to Press, In 5 Minutes or Less!”

For the experienced user who is looking for a quick and easy method of Multicyl press selection to the novice user who needs to rely on the practical experience of other professionals,  Press-In-A-Box™  is designed to simplify the purchasing process with a pre-packaged product which is simple to ship and easy to install.  With step by step assistance from our website the user will be punching holes faster with Multicyl than any competitors’ press.

To facilitate the selection process our Systematic™ Press Selection Method has been designed to cut through the calculation process involved in selecting our products.  There are many important considerations which a Multicyl user must consider when designing his package including air pressure, tool selection, type of material and thickness.  Also important is cage selection with issues such as tool height and compatibility, throat depth and material access. Choice of actuation component packages are matched to the cylinder and cage selection to conform 

with local and OSHA approved safety standards.

A simple box entry system is all that’s required to enter the relevant information to obtain the tonnage requirement for the job.   Once entered the choice of Multicyl components automatically appear for the user to select from.  Our goal with these tools is to help Multicyl users quickly and independently work through the initial and ongoing process of buying and using Multicyl products.  But don’t forget – our team is always ready to help, so call or email any time.