Monday, 17 December 2012

Happy Holidays!

The holiday season is upon us once again.  Remember, we are still open here at Multicyl for any Holiday shut down repairs that you may require.

Happy Holidays from all of us at Multicyl. 

Saturday, 1 December 2012

Press In A Box

Looking for a quick to setup solution for your punching, notching, shearing, or other needs? 
Look no further than our Press-In-A-Box!

The whole system can be setup and be ready for production in under 5 minutes.  That's right, from box to press in under 5 minutes.

 Click here for more info:  Press-In-A-Box

Wednesday, 8 August 2012

Summer Heat


Hot, hazy days have your Multicyl feeling sluggish?   Unfortunately humid ambient air is a reality in most plants.  This humidity can freeze on the mufflers of the exhaust valves.

As the valve freezes over, the cylinder cannot vent the air out fast enough and the return stroke becomes “sluggish”.  To alleviate this problem, the muffler can be removed, which will cause greater exhaust noise, or it can be replaced with a larger muffler with more surface area.


Another common mistake that is made is installing a muffler or air line on the exhaust port of the MC series cylinders (the NPT threaded hole between the air and the oil cylinders).   Installing a muffler or breather vent here restricts air flow and therefore restricts the speed at which the cylinder operates.


Dusty shop floors are another common cause for system slow downs.  At the back of the foot valve, there is a breather vent. 

These vents can become clogged with dust and will negatively impact system performance.  This is a very easy fix.  Simply remove the vent and either blow it out with an air gun, or in extreme cases, wash it first in a solvent tank, dry, and reinstall.

If you still have questions, feel free to contact us

Wednesday, 4 July 2012

Busy summer ahead...

Summer is traditionally a slow down time in our industry as people take holidays and projects wait until fall and trade show season to heat up... but not this year!  We are going to have one of the busiest summers in recent years as we have secured multiple large projects including one in which we are working with one of the largest aluminum extruders in the United States to supply them with a quantity of six Multicyl MRL machines.  Look for updates and pictures of the project as in progresses in the near future!

Thursday, 3 May 2012

Multicyl Safety

Safety is always an important consideration when selecting and installing new machinery.  In addition to our two hand anti-tie down option and our patented self-adjusting stroke which can be used to reduce pinch points, Multicyl now offers standard 80/20 and Lexan guarding packages!


Tuesday, 3 April 2012

A Great Start


The first quarter of the year has proven to be a great start!  Numbers are up, customer enquiries are high, and we have some exciting projects on the horizen - we are excited for the rest of Multicyl's 2012!

Tuesday, 6 March 2012


Time to take a look at another successful Multicyl project!



 Wiremold, a very good and continued customer of Multicyl, contacted us for a solution to a sheet metal punching application they had.  The need was for 13 holes  to be punched along 3 edges of large panel – but with both positional adjustment and gagged selectability of some holes.   The result was excellent; a custom machine with 7 cylinders showcasing many of the benefits of Multicyl – versatility, power, punching speed, and safety.  Visit www.multicyl.com or click the picture below to see the machine in action!